Distribution Racks

The NEW Free Standing Swing Rack is an innovative swing-out rack from Belden. It provides easy access to the rear of rack mounted equipment in a free standing environment. Primarily used in areas where space is limited and rear access is essential. Manufactured from 12 gauge cold rolled steel. 43U of 19" equipment mounting tapped 10-32. Heavy duty caster allows for mounting 500 lbs. of equipment. 14-3.5" x 3.75" cable management access openings on the front of the rack provide for 183.75 square inches of cable openings. Equipment mounting is EIA-310-D compliant with a 4" deep upright channel. Each rack includes assembly instructions and 80 mounting screws.

• 19" Rack can be built as either a left or right hinge and opens 90 degrees. Locking frame can be released with a lift and turn latch mechanism.
• Rack can be positioned as close as 7" from wall.
• Equipment up to 18.5" deep can be pivoted 90 degrees to the right or left.
• Cable management allows for cable routing without interference of the swing rack.
• Cable routing can be from either the top or bottom.
• Friction lock is included to prevent rack movement while servicing.
• Racks can be bolted side-to-side.